Categories

Jump Starter

Jump Starter

All collections

Rainstante

Menu

39800mAh Jump Starter Power Bank 12V Car Emergency Start Power Supply 5V/2A With LED Light

Product details

Specification:

Name: Car Jump Starter

5V-2A

5V-2.1A*2; 12V Jump Start

Dimension: 175*85*40mm

Net Weight: 375g

Package Weight: 955g

Tool box size: 280*220*55mm

 

Function:

-Stable voltage, current, balanced charging function.

-Class A+ cell, safe and explosion-proof.

-Upgrade 4 cell and start strong.

-600A Starting Current.

-1200A Peak Current.

-39800mAh Large Capacity.

-Diesel 5.0L, gasoline 6.0L car can be used.

-Reverse connection protection.

-2 USB charging.

-Full power can be started 40 times.

-Limit temperature -20 ~ 60 ℃.

-Intelligent Protection System.

 

Before use, there is a small indication

[1] that the car cannot be started due to continuous ignition / or the key cannot be turned, and the positive and negative poles of

[2] cannot be reversed after every 30 seconds from the start. The two clips cannot be short-circuited.

Remove the clip within 30 seconds after the car is successfully started.

Violation of the above three actions may cause the [fuse box] of the clip to blow. Please pay attention to the operation method.

 

Usage tips! (All charging treasures can be consulted)

The product has just been received. First turn on the flashlight to discharge, then charge the product for at least 4 hours, and then start the car, because the product contains virtual electricity. This action can extend the life of the product!

 

Tips for daily maintenance:

1: The battery has an expiration date. Whether you use it or not, it is recommended to charge and discharge the battery once every 2-3 months.

When not used for a long time! Please keep 3 grids of power supply or more than 50% power!

(Tips: Remember to charge the battery once every 2-3 months when not in use. If the power is low or virtual energy storage affects the battery, good maintenance will last longer)

 

Emergency at night, Rescue lighting:

1. Built-in glare lighting system.

2. Press and hold the middle button for 3 seconds. Press again into burst mode.

3. After turning on the flashlight, press the switch again to become a flashlight. The switch is the emergency mode.

 

Note:

When using the product, please turn on the flashlight first to discharge, and then charge the product for more than 4 hours before starting the car, because the product contains static electricity. This can prolong the life of the product!

 

Package list

Car jumper cable *1

Protective clamps (Red=positive; Black=negative) *1

1 to 3 Charger cable *1

English instructions *1

Tool box *1

You might like these